IEC 60068 Vibration Shaker For Environmental Testing

Product application

How will your product withstand the stresses of real-world use? Vibration testing provides the answer, ensuring durability and reliability critical for success in markets from automotive and aerospace to electronics.

Sinuo partners with you to deliver tailored vibration testing solutions. We move beyond standard compliance (supporting GB, GJB, UL, IEC, ASTM, and more) to focus on your specific application challenges. Our goal is to equip you with the precise testing capability needed to accelerate time-to-market, enhance product quality, and build a competitive reputation for unwavering reliability.

Vibration Testing System Configuration

1. The test conditions provided by customer;

2. Test type: Sine sweep; Random; Shock

3. Frequency response range: 1-3000Hz

4. Formula:

Equipment Principal Diagram

Equipment technical parameters

1 A20S34 Electromagnetic Excitation Generator:

1.1 Maximum Sinusoidal Excitation Force: 2200 kg.f peak

1.2 Maximum Random Exciting Force: 2200 kg.f RMS

1.3 Maximum Impact Excitation Force: 4400 kg.f

1.4 Frequency Range: 1-3000 Hz

1.5 Payload: 300 kg

1.6 Maximum Displacement: 51 mm P-P

1.7 Maximum Speed: 2.0 m/s

1.8 Maximum Acceleration: 100G (980 m/s²)

1.9 First-order resonant frequency:2600 Hz±5%

1.10 Vibration isolation frequency:2.5 Hz

1.11 Moving coil diameter:Ф340 mm

1.12 Moving coil weight :22kg

1.13 Screw on the table:17×M10

1.14 Flux leakage:＜10gauss

1.15 Equipment size: L 1080mm×W 920mm×H 950mm (vertical table)

1.16 Equipment weight : 1920Kg (Excluding horizontal slide table)

2 LA-24K digital switching power amplifier:

2.1 Output power:20KVA

2.2 Output voltage:120V

2.3 Output current:200A

2.4 Amplifier efficiency :≥90%

2.5 Switching frequency:116KHz

2.6 SNR:≥65dB

2.7 Noise:≤70dB

2.8 Amplifier weight:500KG

2.9 Amplifier size:W600mm×D 900mm×H 1280mm

3 Servo protection system

Function:Temperature, wind pressure, over-displacement, over-voltage, over-current, input under-voltage, external fault, control power supply, logic fault, input phase loss

4 Digital vibration controller VCSusb-2

4.1 Hardware configuration:2 simultaneous input channels, 1 output channel

4.2 Control function module:Sine, random, classical shock

4.3 Control computer:Original brand computer with 17″ LCD monitor, keyboard/optical mouse

4.4 Software:English operation, time domain and frequency domain analysis, signal source, sine frequency sweep analysis, etc. It can automatically generate WORD test reports. It can display, store the signals and data, and set test parameters and analyze functions.

4.5 Operating system:Windows

4.6 Acceleration sensor LAB:Frequency range: 1-12000Hz

Sensitivity: 30pc/g

Temperature range: -40 - 160℃

5 VT120 vertical extension table

5.1 Material:Magnesium alloy, surface hard anodized

5.2 Table size:1200mm×1200mm

5.3 Fixed hole:M8 stainless steel screw sleeve, durable and wear-resistant

5.4 Upper limit usage frequency:Sine 400 Hz, Random 2000 Hz

5.5 Weight:About 145KG

6 HG120 horizontal oil film slide table

6.1 Material:Magnesium alloy, surface hard anodized

6.2 Table size:1200mm×1200mm

6.3 Fixed hole:M8 stainless steel screw sleeve, durable and wear-resistant

6.4 Upper limit usage frequency:Sine 400 Hz, Random 2000 Hz

6.5 Weight:About 151KG (without connection head)

7 B752S cooling fan(Including silencer)

7.1 Fan power:7.5KW

7.2 Fan flow rate:67.5m³/Min

7.3 Fan pressure:0.067kgf/cm2

8 Electrical requirements

8.1 Power supply:3-phase 380V/50Hz, 35 KVA

8.2 Compressed air:0.6Mpa

8.3 Ground resistance:≤4Ω

Main technical parameters of digital vibration controller

Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery testing equipment,  electromagnetic compatibility (EMC) test system, environmental testing equipment, fire retardant test equipment, dust-proof waterproof testing equipment and electrical appliances testing equipment. Our products covering electrical vehicle, electric power, communication, electrical appliances and electronic devices industries.

Sinuo has a professional technical research and development team, which is proficient in various international standards such AS IEC, ISO, EN, VDE, BS, AS, ASTM, GB and industry standards such AS MBN LV124, VW-80000. We master physical mechanics, heat, electricity, fluid and other theoretical knowledge in the application of equipment. And continue to focus on industry standard equipment performance optimization, operation simplification and equipment stability and reliability improvement.

Sinuo has two factories in Guangzhou and Dongguan, and cooperates with many research institutions and schools. Our R&D and production capacity are in the forefront. We have authorized agents in South Korea, the United States, South Africa, Egypt, Pakistan, the Philippines and other places, we serve customers BV, CSA, Intertek, SGS, TUV and other internationally renowned testing and certification institutions, local government quality inspection departments and production factories.